dallmeier MDF5450HD-DN Скачать руководство пользователя | Manualshive

Страница: 11 / 56

background image

Rev. 1.0.0 | © 2019 Dallmeier | www.dallmeier.com

11

Commissioning MDF5450HD-DN

5 General Notes

Scope of Delivery

The standard scope of delivery includes:

•

1× Hand tool for loosening and tightening the housing ring

•

3× Mounting screw for fixing the dome housing in suspended ceilings with a panel thickness of less than 9 mm or greater than 18 mm

•

1× Weidmüller plug-in connector BL 3.50/02/180 SN (female plug) for Power IN interface

• 1× Drilling template

•

Product documentation

The scope of delivery may differ depending on the ordered equipment, device variant or country of destination.

Transportation and Packaging

Store the original packaging for later transportation.

Dallmeier is not responsible for any damage resulting from unprofessional or improper transportation.

The device should only be shipped in the original packaging.

If the original packaging is no longer available, ensure that the used packaging sufficiently protects the device against damage, moisture, heat and cold.

Warranty

The terms and conditions valid at the time the contract was signed shall apply.

«
...
9
10
11
12
13
...
»

Содержание MDF5450HD-DN

























































Отзывы:

Нет отзывов

Похожие инструкции для MDF5450HD-DN

Бренд: Samsung Страницы: 164

Бренд: Samsung Страницы: 120

Бренд: Samsung Страницы: 102

Бренд: Samsung Страницы: 133

Бренд: Samsung Страницы: 28

Бренд: Samsung Страницы: 38

Бренд: Samsung Страницы: 24

Бренд: Samsung Страницы: 6

Бренд: Samsung Страницы: 3

Бренд: Voigtländer Страницы: 4

Бренд: Minolta Страницы: 33

Бренд: GPD Global Страницы: 11

Бренд: Eborn Страницы: 3

Бренд: Omron Страницы: 594

Бренд: ADEMCO Страницы: 8

Бренд: Jimi Страницы: 12

Бренд: Vivitar Страницы: 61

Бренд: Planet Страницы: 78

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды