background image

DVE-4 / DVE-8 / DVE-16

www.dallmeier.com

32

5.7.1 

Reboot

Proceed as follows in order to reboot the device:

 

Click 

Reboot

.

 

Confirm the subsequent info dialog.

The device is rebooting.

5.7.2 

Reset

The default settings of the device can be restored to the network configuration or the device 

can also be completely reset to factory settings.

Restore

The default settings are restored. The network settings and the data of the user manage-

ment remain.

 

Click 

Restore

.

 

Confirm the subsequent info dialog.

The device will restart after the restore.

Default Settings

The device is entirely reset to factory settings. All settings are deleted.

NOTICE

The device is no longer under the set IP address reachable if it has been 

changed! 

 

Use the tool “PService” to locate the device on the network.

 

Click 

Default

.

 

Confirm the subsequent info dialog.

The device will restart after resetting to factory settings.

5.7.3 

Import Configuration

A configuration file can be imported.

 

Click 

Browse 

in the 

Import Config. File

 section.

 

Select with the file explorer the required configuration file.

 

Click 

Open

.

The configuration file is displayed in the 

Config File

 field.

Содержание DVE-16


































Отзывы: