DLS 4 / DLS 8 / 8 PLUS / DLS 16 / 16 PLUS
79
Dallmeier electronic
Ø
Select an alarm host with a left click in the alarm host list.
Ø
Set the alternative alarm host with the
Alternative
drop down box.
Fig. 10-7
The alternative alarm host will be displayed in the select list’s
Alt.
column.
10.3.4
Connection check
The
Alarm-Host check
function allows a checkup of the connection between recorder and
alarm host by sending a test message. The successful transmission can be controlled at
the alarm host (PGuard) The recorder does not receive an acknowledgement.
Ø
Select an alarm host with a left click in the alarm host list.
Ø
Open the
Alarm-Host check configuration
dialog with
Alarm-Host check
.
Fig. 10-8
There are three options to set the transmission time:
1.
Activate the
Interval
radio button in order to send the test message in defined time in
-
tervals.
2.
Activate the
Point in time
radio button in order to send the test message at a defined
point in time.
3.
Click the
Send
button in order to send the message only once. A delay of up to 10 minutes
can be set as well.
