DLS 4 / DLS 8 / 8 PLUS / DLS 16 / 16 PLUS
46
Dallmeier electronic
Ø
Open the
Recording Settings
dialog via
Setup
>
Recording
>
Camera/Tracks
.
Ø
Observe the explanations above.
Ø
Set the required
Track Mode
.
Fig. 8-5:
Setting Track
Mode
The
Auto Configuration Options
dialog will be displayed.
Fig. 8-6: Default settings
Ø
Observe the explanations below.
Ø
Modify the default settings for
Analog
Cameras if necessary.
Ø
Finally confirm with
OK
.
The default settings will be adopted for all connected cameras. The memory will be assigned
in equal parts to every camera. Recording (permanent) will be activated for all connected
cameras.
Ø
Configure the recording as described below if required.
8.2
Connection
The recording configuration mostly can be done before the connection to the single came
-
ras is established (pre configuration). Exceptions exist for some configuration options (e.g.
preview image, SEDOR, SmartFinder).
The connection to analogue cameras is established with the physical connection to the cor-
responding video input. In the
Recording Settings
dialog all connected analogue cameras
will be labeled with a yellow symbol (column
Camera Name
).
8.3
Basic configuration
The basic configuration normally is independent from the track mode, the camera type and
other settings. Exceptions will be pointed out.
