DLS 4 / DLS 8 / 8 PLUS / DLS 16 / 16 PLUS
29
Dallmeier electronic
Time is not set automatically despite good reception:
The deviation of the set time from the actual time is too large. In this case, set the time
manually first. The set time may not deviate more than 1 000 seconds from the actual
time. Then activate the radio clock module.
7.3
System security
For functions with which external access is required, the corresponding ports on the system
must be open.
For system security reasons, the number of open ports should be kept to a minimum. This
is already carried out at the factory by blocking the ports definitely not required for Dallmeier
systems.
The few ports which are still relevant are enabled in the default setting to ensure full com-
patibility to the other Dallmeier units. If certain ports are not required for the current recorder
configuration, they can be deactivated in the System Security dialog.
For example, if the time setting of your system is not made by external systems (time ser
-
vers), then the port for
Timeserver
can be deactivated.
Ø
This dialog is accessed via
Setup
>
System
>
System Security
.
Fig. 7-6
Ø
Activate the required protocols.
Ø
Deactivate the not required protocols.
Ø
Confirm with
OK
.
7.4
Options
The basic functions of the recorder can be set in the
Options
dialog.
Ø
Open the
Options
dialog using
Setup
>
System
>
Options
.
