dallmeier DLS 24 S1, Руководство по установке и настройке

Страница: 55 / 215

55 Dallmeier electronic GmbH & Co.KG
7.4 Switching speed of the sequencer
The Switching Speed (Sec) setting is used to set the time interval
at which the video pictures switch from camera to camera.
Settings from 1 to 99 are possible. The value should not be selected
as less than 5 seconds, as it is very difficult to evaluate a picture in
this case.
NOTE
The value applies as a constant for all cameras in
the display sequence, but if one or another video
picture is to be viewed longer, it makes sense to
do the following:
Click the respective camera twice (or more) in
succession for the display sequence when
selecting the cameras. The picture is now
displayed twice in succession in the display
sequence. With a switching speed of 5 seconds,
the relevant picture then remains on the monitor
for 10 seconds.
7.5 Activating event switching
If the picture of a camera is to be switched to based on an event,
you can select between Movement and Contact in the Event
Switching field.
Fig. 7-4
Fig. 7-5