DIS-2/M StreamerPro HDD Large UTP
57
Dallmeier electronic
12 Information and log
12.1
Information dialog
General information about the module will be displayed in an information dialog.
¾
Open the DIS-2/M UTP StreamerPro dialog via About ….
The following will be displayed:
z
Type of module
z
Version number of the recorder software
z
Version number of the encoder
z
Version number of the Linux kernel
z
Serial number
In addition, information about the installed hard disks and the Uptime will be displayed in
the bottom section.
12.2
MAC adress
The MAC address of the network interface is displayed in the Network settings dialog.
¾
Open the Network settings dialog via Common settings >
Network ….
12.3
Event log
Current errors are displayed as a list but they will not be saved.
¾
Open the Event log dialog via Common settings > Event log ….
Please note that a removed error will not be displayed after the modules reboot.
Fig. 12-1
Fig. 12-2
Fig. 12-3