DDF4820HDV-DN-IM/-SM
www.dallmeier.com
73
11.3
Scheduler
The scheduler function allows you to define specific time periods during which event mes
-
sages are sent out or event-triggered actions are executed.
Note that
•
scheduler settings only apply to the currently selected event handler.
•
the minimum selectable period is 15 minutes.
•
the week timer applies to the entire year if no exceptions are set.
11.3.1
Week Timer
Click
Scheduler ...
.
The
Week timer
tab is displayed.
Fig. 11-6
Light grey
areas in the week timer represent
active
periods.
During active periods the
messaging function
is
enabled
and
event actions are ex-
ecuted
.
By default, the entire period in the week timer is active.
Select Inactive Periods
Click
inactive
.
In the week timer, click and hold the left mouse button and draw a rectangle over a
relevant period.
Release the mouse button.
Repeat the last two steps until all relevant inactive periods are selected.
