DDF4820HDV-DN-IM/-SM
www.dallmeier.com
69
The item name in the configuration menu and the dialogue title is automatically updated
with the entered event handler name after the settings have been saved.
To edit an already set event handler, click the related item in the configuration menu.
11.1
SMTP Server
When using this action type, the alarm/event messages are sent as e-mails via SMTP
(Simple Mail Transfer Protocol) to the specified alarm host (SMTP server) which may then
forward them to several e-mail recipients.
Depending on the used SMTP server and its configuration, any name can be used for the
sender or a SMTP authentication is required.
Fig. 11-2
If necessary, enter the
User name
and the
Password
for the SMTP authentication.
Enter the
Sender
.
Enter the e-mail addresses of the
Recipients
(separated by semicolons) to which the
SMTP server is supposed to forward the event-triggered e-mails.
Enter the
Subject
and the
Message
of the e-mail.
