DDF4820HDV-DN-IM/-SM
www.dallmeier.com
61
•
S
pot Light
(spot metering):
The exposure metering is only carried out for the image section as defined by the user.
That area is then optimally exposed. However, the other image areas can be heavily
overexposed or underexposed.
This setting is recommended for scenes with extreme variations in brightness when a
specific image section is to be exposed absolutely correctly.
In order to define an area for spot metering, proceed as follows:
Select
Spot Light
from the drop-down list
exposure Mode
.
Click and hold the left mouse button and draw a rectangle (red) over the relevant im
-
age area you want to define for spot metering.
Release the mouse button.
Another click within the image removes the defined metering area.
Once the area defined for spot metering meets your requirements, click
oK
.
10.4
Privacy Zones
This function allows you to hide (mask) up to 4 user-definable areas in the camera to
ensure privacy protection and compliance with laws and regulations that prohibit certain
locations from being monitored and/or recorded. The defined Privacy Zones are then
directly blackened in the camera.
Note that the combined area of all active Privacy Zones can maximally amount to up to
20% of the entire image.
Open the
Privacy Zones
dialogue via
Video
>
Privacy Zones …
.
Fig. 10-6
