manualshive.com logo in svg

dallmeier CasinoCam DDF3000AV, Руководство по установке и настройке

Поделиться
Скачать
dallmeier CasinoCam DDF3000AV Скачать руководство пользователя страница 27

DDF3000AV(-DN) / DDF3000AV(-DN) CasinoCam

®

27

Dallmeier electronic

8.3

Image Functions

The Image Functions area allows you to make settings concerning the image quality.

8.3.1

Progressive Scan

z

Progressive Scan = Off

Two fields with differing time index are successively
captured and transmitted (interlaced scanning).

Due to the different points in time of capturing within one
frame the “interlace effect” may occur with moving objects.

Compared to progressive capture rapid movements are
displayed more smoothly and in a less jerky manner by
twice as much motion phases per second.

z

Progressive Scan = On

The frame is captured at one point in time.

Via PsF method (Progressive segmented Frame) the captured frame is segmented
in two fields with the same time index, which then are transmitted one after another.

Compared to interlaced scanning, every reassembled frame has only one motion phase.
The “interlace effect” is thus prevented, whereas rapid movements are displayed in a
more jerky manner.

NOTE

To record camera images with maximum resolution the
Dallmeier recorder should be operated in full picture mode and
the camera should be set to Progressive Scan = On.

8.3.2

Backlight

The Backlight function compensates for the silhouetting effect
of backlit objects (e.g. in front of windows, glass doors or other
sources of light).

The camera analyzes the light conditions within the field of
view and adjusts the exposure parameters accordingly.

z

Predefined fields of view

¾

Choose between Up and Down to define the position
of the field of view (in the example Down has been
chosen).

z

Freely-defined field of view

¾

Select Set.. and press the Enter button.

The field of view is displayed in white. The position of the
field of view can be changed with the selector.

-------- Image Functions ---------

Previous Page.

>

Progressive Scan

< Off >

Backlight

Off

Digital Zoom

On..

White Balance

ATW..

-------- Image Functions ---------

Previous Page.
Progressive Scan

Off

>

Backlight

< Off >

Digital Zoom

On..

White Balance

ATW..

------------- Backlight --------------

Содержание CasinoCam DDF3000AV


































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды