DGM02
Device Manual
Made in Italy
DALCNET S.r.l.
36077 Altavilla Vicentina (VI)
–
Italy
Via Lago di Garda, 22
Tel. +39 0444 1836680
–
Rev.
06/12/2022 -
Pag.
22/32
SECTION: DIAGNOSTIC
–
LOG
In the LOG section it is possible to carry out a diagnostic of the product.
SECTION: DIAGNOSTIC
–
LOG CONFIGURATION
In the case of remote assistance, it is possible to check the errors that will be recorded in the "LOG" section.
In this case it is useful to configure the type of diagnostics by accessing the "Log Configuration" section, the following page will
be displayed:
The "
S
ECURITY
L
EVEL" sets what type of information you want to view on the Log:
“Info” information about the system that does not denote any type of problem;
“Warning” information that denote the correct functioning of the system but which may affect its functioning;
“Fault” that cause an actual impact on the
system.
The "
V
ERBOSITY
L
EVEL" denotes the level of information we have above and are: "Low" low level, "Medium" medium level and
"High" high level.
