DALCNET DGM02, Руководство по эксплуатации устройства

Страница: 29 / 32

DGM02
Device Manual
Made in Italy
DALCNET S.r.l.
36077 Altavilla Vicentina (VI) – Italy
Via Lago di Garda, 22
Tel. +39 0444 1836680
www.dalcnet.com – info@dalcnet.com
Rev. 06/12/2022 - Pag. 29/32
Q
UERY RGBWAF DALI DT
8
COLOUR LEVELS
This command is used to query colour levels.
If the addressed device is of type DT8, the DGM responds with the current color levels / 6 bytes per device), otherwise it returns
all data at 00. The request is enclosed by the tags: <rcol> and </rcol>.
The maximum size is fixed at 64.
If a node is not of type DT8, the colour codes are all set to zero (6 times 0x00).
Request color levels
<rcol addr='0000' size='0002'></rcol>
Answer from DGM <rcol>808010000000FE0080000000</rcol>
R|G|B|W|A|F|R|G|B|W|A|F|
R = red
G = green B = blue W = white A = amber F = free color
S
ET COLOR TC LEVEL
This command is used to set the correlated color temperature (Tc). If the addressed device is a TW (Tunable White) type DT8, the
DGM will set the correct Tc, based on the new value, otherwise the command has no effect. The command is enclosed by the tags:
<sctc> and </ sctc>.
The maximum size is fixed at 64.
The MASK value 0xFF is used to leave the current color unchanged.
Address: the address refers to the current position on the DB, where the Dali node is located.
Size: maximum size = 64
Set color levels (DT8 TW devices only)
<sctc addr='0000' size='0001'>FD01</sctc>
To calculate the command value to use based on the CCT value in Kelvin, you need to use the following procedure:
Convert the Kelvin CCT value to Mirek:
Mirek value =
1000000
Kelvin value
example
3000K →
1000000
3000
= 333 Mirek
The Mirek value must be converted into hexadecimal: for example, 333 -> 014D
The third and fourth digits of the value became the first and second digits of the command
The first and second digits of the value have become the third and fourth digits of the command
Example
01 4D 4D 01
To set the CCT to 3000K on address A0 you need to use the following command:
<sctc addr = '0000' size = '0001'> 4D01 </sctc>
See the table below for reference:
CCT (K) Command CCT (K) Command CCT (K) Command CCT (K) Command CCT (K) Command
2200 C701 3000 4D01 3900 0001 4800 D000 5700 AF00
2300 B301 3100 4301 4000 FA00 4900 CC00 5800 AC00
2400 A101 3200 3901 4100 F400 5000 C800 5900 A900
2500 9001 3300 2F01 4200 EE00 5100 C400 6000 A700
2600 8101 3400 2601 4300 E900 5200 C000 6100 A400
2700 7201 3500 1E01 4400 E300 5300 BD00 6200 A100
2800 6501 3600 1601 4500 DE00 5400 B900 6300 9F00
2900 5901 3700 0E01 4600 D900 5500 B600 6400 9C00
2950 5301 3800 0701 4700 D500 5600 B300 6500 9A00