DALBO TRIMAX Classic, Руководство пользователя, Страница: 13 / 25

TRIMAX Classic
Page 13
Setting up
The machine is supplied with factory settings, but fine adjustment will always
be required before use. Numerous adjustment options make the machine
more flexible and ensure maximum use.
Depth
Depth is controlled by the cage roller at the back, in the form of a T-ring rol-
ler.
Tine depth is adjusted using pins in the brackets (A). The upper pin (B) de-
termines depth and the lower pin (C) is for support, bearing the cage roller
when the implement is lifted.

Depth adjustment may necessitate adjusting the top bar, as the frame must
always be horizontal.
Deeper tilling
Fig. 4
Setting deeper tilling is done by
lifting the machine sufficiently from
the ground that the arm (D) no lon-
ger presses on pin (B). The pin can
then be withdrawn from the brack-
et and moved one hole higher. The
lower pin (C) must be moved cor-
respondingly, so that the support is
as close to the arm (D) as possible.
If depth is altered, it may be necessary to run the tines into the soil a little (or
support the cage roller) to put pressure on the cage roller. The pin (C) can
then be easily fitted into the hole closest to the arm (D).
D
A
B
C