DALBO MAXIDISC Скачать руководство пользователя страница 18 | Manualshive

Страница: 18 / 38

DALBO MAXIDISC Скачать руководство пользователя страница 18

MAXIDISC

Side 18

Side Disc

Fig. 8

A disc mounted on the left edge of the
MAXIDISC limits the amount of  soil be-
ing  cast  out  by  the  disc  in  the  very
front. Adjust the side disc vertically by
using  the  pin  (A)  according  to  the
working  depth  of  the  MAXIDISC.  The
disc can also be moved in a horizontal
direction  by  loosening  the  mounting
bolt.

Transport Locks

An adjustment bolt (A) on the wheel frame transport lock ensures correct place-
ment of the transport lock.

Fig. 9

Transport locks
To ensure the correct setting of the transport locks (hooks), a wire tightener has
been mounted on the wire attached to the wings and to the packer roller. The wire
must be long enough that the transport locks can be disengaged, allowing the side
wings and the packer roller to be free, but also long enough that the transport locks
can fall down, catch and become completely engaged on the side sections and the
packer roller.

Fig. 10

Transport lock on the packer roller

Transport lock on the main frame

A

A

«
...
16
17
18
19
20
...
»

Содержание MAXIDISC







































Отзывы:

Нет отзывов