DALBO MAXICUT, Руководство пользователя, Страница: 12 / 30

MAXICUT
Side 12
Uses
MAXICUT is a newly-developed heavy blade roller, designed for use on crops with
long, thick stems. By cutting the remaining organic materials, decomposition is
accelerated.
Fig. 1
MAXICUT is a blade roller, on which the
sections are independent of each other.
Heavy-duty bearings are standard.
MAXICUT 600 at work
MAXICUT is used after harvesting on crops such as maize, sunflower or rape, when
the total weight of the machine and ground conditions are optimum. When the roll-
ers are filled with water and the ground is as dry as possible, the machine is at its
most effective.
The machine has to be operated at relatively high speeds of over 15 km per hour,
preferably 18-25 km per hour at which the rollers will perform best on stubble and
plant residue. For an extra thorough result, another run can be made over the field.
The rollers are designed to be filled with water if required. The machine comes from
the factory without water to simplify transport.

The steel tubes may only be filled with water or liquid with a density less than
1.15 g / cm³. This avoids overloading the machine's hydraulics and welded
frames.