DALBO MAXICUT 920, Руководство пользователя, Страница: 20 / 49

MAXICUT
Page 20

It is extremely important that the hydraulic lever that goes to the hydraulic weight
distribution of the machine is in float position during work in the ground so as not
to damage the hydraulic system (the large cylinder lifting the side frames. The
hose marked with: Red)

Before the rolling is initiated, the pull must be horizontal.
When turning the machine on the headland, the machine must be lifted up onto
the timing belt to avoid unnecessary twisting in the machine's frame construc-
tion. An easier curve speed can be used with the machine in the ground.
Folding
The timing belt is lowered down to the ground and the knife roller is lifted off the
ground.
From here, the side sections can be raised to the maximum height and folded to-
gether.
When the side sections are fully folded down, they are lowered into the transport
locking device.

If additional equipment is fitted on the machine, it is IMPORTANT that this is com-
pletely lowered before the machine is folded. Otherwise the machine could be
damaged.
When driving the machine in transport position, it is important to ensure the side
sections are located in the transport hooks. Otherwise, this may cause personal
injury or damage to the machine.