DAL-BO MaxiDisc, Руководство пользователя

Страница: 13 / 38

MaxiDisc
Side 13
Hitching and Unhitching
The linkage of the MaxiDisc is manufactured in compliance with DS/ISO
730-1 category II and III.
Hitching
First mount the lift arms into the ball sockets (A). Elevate the lift and move
the hitch stand up into the transport/working position (B).
Fig. 2
 
Remember to secure the lift arms and the hitch stand with lynch pins.

Remember to raise the hitch stand.


Adjust the sway chains tightly until there is no slack in the lift arms.
Hydraulic System
The MaxiDisc requires four double-acting hydraulic outlets.
Table 1. Hose markings
Cylinder Colour Outlet Function
Wing fold Red Double-acting Fold wing sections
Wheel frame Yellow Double-acting Raise and lower MaxiDisc
Angle Blue Double-acting Adjust working angle of discs
Depth Green Double-acting Adjust working depth of discs
 
Wing fold cylinder requires a hydraulic outlet with a floating position.

Check the hydraulic hoses for kinks or pinches.
A B