Daktronics SPORTSOUND 1500HD GEN II, Руководство по установке

Страница: 11 / 46

Mechanical Installation
7
Mounting the Control Enclosure
Reference Drawings:
Mtg Detail; SS Control Encl Beam Clamp ...................................................... DWG-1131068
Tools Required: 1/2" & wrench/socket, 3/4" wrench/socket
Note: Installation described below requires I-beams with 3/16" to 3/4" thick beam
flanges. If an alternate mounting option for control enclosure is preferred, it is
the responsibility of the installer to adequately secure the enclosure to the base
structure.
The Sportsound control enclosure (shown in Figure 5 ) mounts toward the base of
the display structure. The enclosure typically mounts on the backside of the support
column(s) within 50' (15.2 m) of the sound cabinet. Refer to the drawings listed under
Mount the Cabinet (p�6) for suggested control enclosure mounting locations.
Attach horizontal Unistrut pieces to the top and bottom rear flanges of the control
enclosure with provided 5/16" hardware through the existing holes. Raise the enclosure
to the desired height, using side lift eyes or lifting straps if necessary, and then secure
with provided spring nuts and 1/2" hardware. Refer to DWG-1131068 in Appendix A for
complete hardware assembly and mounting instructions.