Daktronics GALAXY GT6 Series, Инструкция по установке и эксплуатации

Страница: 6 / 42

Installation Preparation
2
2 Installation Preparation
This section explains what to consider before installing a Daktronics Galaxy
®
GT6x display.
Follow all guidelines and safety precautions in this manual when installing the display. Do
not modify the display or control system in any manner without the written permission of
Daktronics engineering staff.
Any unauthorized modifications nullify the display warranty.
Pre-Installation Checklist
• The display was not damaged during shipping
• The mounting structure will provide a straight and square mounting frame for the
display
• The support structure can carry the weight of the display and meets local and
national codes
• Ensure proper power is available at sign structure – refer to shop drawing for display
power requirements
• The display cabinet has no holes (accidental or intentional) that will allow water to
enter the display
• All display modules are fully latched into the display cabinet
Structure Requirements
Support structure design depends on mounting method, installation height, display size,
and weight. Because every installation site is unique, Daktronics approves no single
procedure for mounting displays.
Things to consider prior to installation:
• The display mounting requires a continuous horizontal stringer across the back
attached to all display mounting points to provide adequate wind load support for
the cabinet
• The structure can carry the weight of the display and wind load
•
Display structure and mounting must not obstruct airflow - refer to shop drawing for
ventilation space requirements
• Light sensor must not be obstructed for the display to function properly
For additional questions about display mounting requirements and specifications, refer to
the display shop drawing or contact Daktronics Technical Support at 800-325-8766.