Daktronics BA-515, Руководство пользователя, Страница: 13 / 208

Section 3: Specifications
The table on the following pages shows all of the mechanical specifications, circuit specifications and maximum power requirements for each model in
this manual. Models are listed in alphanumeric order.
3.1 Single-Section Scoreboards
Notes: Driver address setting can be configured using the J19 address plug. Also, the S1 dip switch is found in all GEN IV drivers. For more details see Section
8.4: LED Drivers.
Signal wires must be a minimum of 22 AWG with shield. Daktronics recommends using W-1234 or W-1614. Models with an –11 or –12 suffix feature red
digits and indicators; suffixes –21 and –22 indicate amber digits.
Model Dimensions Weight
Height, Width, Depth Uncrated
Crated
Digit Size
Digit Color
Maximum
Wattage Power
Amps
per
Line
(Single
Phase) Driver
Number
and
Address
BA-515-11/21 H3'-0", W6'-0", D6"
(914 mm, 1829 mm, 152 mm) 92 lb
(42 kg)
175 lb
(79 kg) 15” (381 mm)
-11: red 150 W 120 V AC 1.3 A A1 61
-21: amber
BA-518-11/21 H4'-0", W9'-0", D6"
(1219 mm, 2743 mm, 152 mm) 96 lb
(44 kg)
18” (457 mm) 150 W 120 V AC 1.3 A A1 61
-11: red
182 lb -21: amber
(83 kg)
BA-518-12/22 H4'-0", W9'-0", D6"
(1219 mm, 2743 mm, 152 mm) 96 lb
(44 kg)
182 lb
(83 kg) 18” (457 mm)
-11: red
-21: amber
150 W
240 V AC
0.65 A A1 61
Specifications
9