User Manual
DMOV-DWH7C
AU: SJE BY: SJE V1 REV: 01/12/24 Page 5 of 12
Standard Features
Camera
•
Minimum focal distance of 5”
•
Built-in, high quality CCD camera with high performance infrared (IR) illuminator modules
•
IR has effective range of 45’+ in
complete darkness
•
Built-in CDS light-
source sensor automatically turns the IR’s on/off by detecting the light intensity of
the environment
•
2.8mm Camera lens provides 110-degree field of view
Monitor
•
7” LED Backlit Monitor
•
Capable of displaying 4 digital wireless cameras
•
Capable of auto scan between Cameras 1, 2, 3, & 4
•
View cameras one at a time, side by side, or quad view
•
Manual image switching modes
Power
Supplying power to your OverView® wireless monitor with provided 12v power adapter
1.
Attach the power input connector on monitor to your included 12v cigarette lighter power adapter.
2.
Plug cigarette lighter adapter into 12v power source.
Supplying power to your OverView® wireless cameras with provided hardwire power adapter
1.
Attach the power input connector on camera to your included hardwire power plug.
2.
Attach t-tap power clips as follows:
a.
Hardwire power adapters include two sets of
wire tap and female disconnects for both power
(red) and ground (blue)
b.
The wire tap clamps onto the wire you’re
connecting to; the female disconnect crimps
onto the Hardwire power adapter: RED for
power, BLUE for ground
c.
The female disconnect slides firmly into the end
of the wire tap, making a secure connection
3.
WARNING:
Hardwire MUST be attached to a MAX 7.5A fused circuit or damage will occur. Warranty
void if instructions are not followed.
Supplying power to your OverView® wireless kit via AC power
1.
If you would like to provide power to your OverView® wireless kit via AC power, you will need to
purchase the accessory AC power adapters from your local Dakota Micro, Inc. Dealer, part number:
DM-PA3.
2.
IMPORTANT: Each unit will need an AC power adapter.
