MANUAL 650212
INSTALLATION INSTRUCTIONS
LAT-NR241
LED Tail Lights for 1959 Chevrolet Impala, Bel Air, Biscayne.
MAN# 650212
Kit Includes:
Installation:
1. Remove the original bulb sockets.
2. Remove the tail light housing hardware so the housing can be removed from the car.
3. Remove the chrome trim from the tail light housing. The outer trim is snapped into place and
will need to be gently pried off with a flat blade screwdriver or similar tool.
4. Next remove the lens to gain access to the housing. There are ten (10) screws that hold the
lens in place, remove the screws and separate the lens carefully.
5. Now is a good time to clean or replace the lens and housings if necessary.
