MAN# 650020a
DGS-4
GEAR SHIFT INDICATOR
DGS-4
Dash Panel
C-clamp
nut
Stud
MOUNTING ILLUSTRATION
VIEW FROM BACK
TOP
RED fused +12V with key on
BLACK ground for DGS-4
YELLOW 1 wire gear output from GSS-1000/2000
BLUE (+) night dimming
PURPLE (+) high beam indicator
WHITE/BLACK (-) negative input for warning indicator *
WHITE/RED (+) positive input for warning indicator *
GREEN (+) right turn indicator
*NOTE: Both warning indicator inputs must be used.
For ground warning signals, connect WHITE/RED to +12v and WHITE/BLK to signal.
For 12V warning signals, connect WHITE/RED to signal and WHITE/BLK to ground.
ORANGE (+) left turn indicator
Operation:
The DGS-4 gear indicator unit works with Dakota Digital’s gear position sending units (such as the GSS-
1000 or GSS-2000). The gear sending unit should be setup for one wire mode (see manual for gear sender).
The DGS unit will then display a letter or number indicating the current gear.
The DGS-4 also has 4 additional indicators. These are, left and right turn signal, high beam indicator, and a
miscellaneous warning light.
