MAN#650346
BIM-19
Bus Interface Module for air ride pressure
(Sensors are sold separately)
B
A
R
E
&
B
L
A
C
K
W
IR
E
W
H
IT
E
W
IR
E
R
E
D
W
IR
E
B
A
R
E
&
B
L
A
C
K
W
IR
E
W
H
IT
E
W
IR
E
R
E
D
W
IR
E
B
A
R
E
&
B
L
A
C
K
W
IR
E
W
H
IT
E
W
IR
E
R
E
D
W
IR
E
Connect to main
chassis ground
+12V
KEY ON POWER
(fused 5 - 20 AMP max)
setup/status switch
To gauge control box
or another BIM
Right Rear pressure sensor
Left Rear pressure sensor
Tank pressure sensor
T
N
K
+
T
N
K
T
N
K
-
P
W
R
R
R
-
L
R
+
L
R
L
R
-
R
R
+
R
R
G
N
D
BIM-19-1
AIR RIDE
L
F
L
F
-
L
F
+
R
F
-
R
F
R
F
+
www.dakotadigital.com
605-332-6513
B
A
R
E
&
B
L
A
C
K
W
IR
E
W
H
IT
E
W
IR
E
R
E
D
W
IR
E
Right Front pressure sensor
B
A
R
E
&
B
L
A
C
K
W
IR
E
W
H
IT
E
W
IR
E
R
E
D
W
IR
E
Left Front pressure sensor
This Bus Interface Module has inputs for up to five solid state pressure sensors. Each input can be configured
individually. There are two interface (I/O) ports on the module. Either one can be connected to the gauge system or to
another module, allowing several units to be daisy chained together. Do not connect the I/O port to anything other
than a Dakota Digital gauge or BIM. Do not mount the module in the engine compartment; it should be mounted in
interior of the vehicle.
Each sensor connected to the bus needs a unique ID number assigned to it. This module has five inputs so it can use
one, two, three, four, or five ID numbers. The module is assigned an ID from 1 – 16 or turned off and will auto detect
how many sensors are connected and use additional ID’s as needed. The factory default ID numbers are 12 – 16 with
all five sensors connected.
Air Ride setup options:
4 bag
3 bag
Front/Rear
Left/Right
LR
-
LEFT REAR
REAR
REAR
LEFT
RR
-
RIGHT REAR not connected not connected RIGHT
LF
-
LEFT FRONT LEFT FRONT FRONT
not connected
RF
-
RIGHT FRONT RIGHT FRONT not connected not connected
TNK
-
TANK (optional for all bag setups)
Specs for each input are:
Part #
Range
resolution
low warning
high warning
SEN-03-9
0 - 300psi
1
0 – 252
48 – 300
