DAISHIN SRM180K страница 12 Скачать руководство пользователя | Manualshive

Страница: 12 / 36

background image

DAISHIN SRM180K

Page 14

M

ONTHLY MAINTENANCE

Transmission wire adjustment:
If  the  machine  does  not  move  or  if  the  transmission  belt  slips  when  transmission  lever  is  pressed,
adjust  the  tension  wire  as  follow  :  unscrew  the  locking  screw  (1  figure  14)  and  increase  the  wire
tension. Try to move the machine again. Perform the adjustment again if needed.
If the machine move  when transmission lever is released, adjust the tension wire as follow : unscrew
the  locking  screw  and  decrease  the  wire  tension.  Try  to  stop  the  machine  again.  Perform  the
adjustment again if needed.

Blade wire:

If  the  blade  does  not  stop  when  the  blade  lever  is  released,  adjust  the  tension  wire  as  follow  :
unscrew the locking screw (2 figure 14) and and decrease the wire tension. Try the machine again.
Perform the adjustment again if needed.
If  the  blade  does  not  move  when  transmission  lever  is  pressed,  adjust  the  tension  wire  as  follow  :
unscrew the locking screw increase the wire tension. Try the machine again. Perform the adjustment
again if needed.

Differential locking wire :

If the locking does not engage when the lever is pressed, adjust the tension wire as follow :
To increase the tension wire : unscrew the locking screw (1 figure 15) and increase the wire tension.
Try the machine again. Perform the adjustment again if needed.
To  loosen  the  tension  wire  :  unscrew  the  locking  screw  and  decrease  the  wire  tension.  Try  the
machine again. Perform the adjustment again if needed.

Figure 14

Figure 15

«
...
10
11
12
13
14
...
»

Содержание SRM180K





































Отзывы:

Нет отзывов

Похожие инструкции для SRM180K

Бренд: Poulan Pro Страницы: 52

Бренд: MK Martin Страницы: 30

Бренд: Toro Страницы: 48

Бренд: Ryobi Страницы: 192

532 42 27-27 Rev. 2

Бренд: McCulloch Страницы: 28

Бренд: Garland Страницы: 172

Бренд: Flymo Страницы: 11

Z Master Professional 7500-D Series

Бренд: Toro Страницы: 80

Tri King 1900 Series

Бренд: Jacobsen Страницы: 30

Бренд: Woods Страницы: 28

Бренд: Flymo Страницы: 10

CZT ELITE Series

Бренд: Bad Boy Страницы: 48

Бренд: Flymo Страницы: 2

Бренд: Grizzly Страницы: 116

Бренд: Cub Cadet Страницы: 36

Бренд: NEISEN Страницы: 17

Бренд: Husqvarna Страницы: 44

Бренд: Husqvarna Страницы: 44

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды