Dairymaster MOOMONITOR +, Руководство по установке

Страница: 17 / 35

4-10
INM12006 – MOOM V3.0
Copyright Dairymaster 2015
Wall Mounting the base station and Antennas
The installation kit provided by Dairymaster will supply equipment for wall
mounting the antenna.
The wall mounted brackets provided are for use on a masonry structure with
suitable bearing capacity to carry to the base station, ancillary antennas and clamp
them onto the 51.7mm (2”) stainless steel pipe provided with the installation kit.
Begin by drilling four holes in a suitable masonry wall with an M10 drill bit.
The holes should be marked on the wall using the base station / basestation
mounting kit as a template for the hole locations.
Figure 11 – Mounting kit for base station onto a masonry wall
(Base station and antenna removed for clarity)
Fixing Points for the
mounting brackets