background image

1

Light Guide

Forming Instructions

GEXNLG15, GERDXNLG15, GEPOXNLG15, GEYAXNLG15, GELGXNLG15, 

GEGLXNLG15, GEBLXNLG15

Tetra

®

 

Contour

LED Lighting System

Remove the protective film 

from the light guide.

1

Mark the light guide at the 

required length, adding 0.5 in. 

(13mm) for every 16 in. (406mm) 

to account for shrinkage during 

the forming process. 

2

Cut the light guide to the 

required length using a 

hacksaw, chop saw (cross cut 

or veneer blade only), band 

saw, or other appropriate 

plastic cutting tool. 

3

Fill the entire light guide 

channel with the GEXNBA 

Silicone Bend-Aid(s) and press 

into place. Bend-Aid must be 

installed prior to heating and 

forming. The GEXNBA Silicone 

Bend-Aid is reusable.

4

Step 1:

Preparation

Silicone Bend-Aid

 

WARNING/AVERTISSEMENT

The light guide is made to use together with the light engine. Please ensure you read the installation guide and 

warnings of light engine before installing. / Le guide est conçu pour une utilisation de pair avec un module DEL 

Contour.  S’assurer de lire les instructions d’installation et les avertissements avant de procéder à l’installation.

 

WARNING/

AVERTISSEMENT

DO NOT heat and form the light 

guide with the light engine installed. 

/ NE PAS chauffer le guide alors qu’il 

contient le module DEL Contour.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two 

conditions: (1) This device may not cause harmful interference, and (2) this device must accept 

any interference received, including interference that may cause undesired operation.
Note:

 This equipment has been tested and found to comply with the limits for a Class A digital 

device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable protection against 

harmful interference when the equipment is operated in a commercial environment . This 

equipment generates, uses, and can radiate radio frequency energy and, if not installed and 

used in accordance with the instruction manual, may cause harmful interference to radio 

communications. Operation of this equipment in a residential area is likely to cause harmful 

interference in which case the user will be required to correct the interference at his own expense.
This Class [A] RFLD complies w i t h the Canadian standard ICES-005. Ce DEFR de la classe [A] est 

conforme à la NMB-005 du Canada.

Отзывы: