Daimler SEATTLE 1343B, Руководство оператора

Страница: 63 / 90

Passenger Entrance and Exit Doors
Page 57
3. After passengers have exited or
entered the vehicle, press the
door control R (Rear) button
again.
4. Check the curbside mirror to
ensure passengers are a safe
distance from the vehicle
before proceeding.
Pull Cord Stop Request
A passenger’s signal to the operator
for a request stop, is accomplished
by pulling down on a cord. The cord
is mounted along the length of the
vehicle.
A chime will only operate once, until
the front or rear door control button
is pressed again, and only then will
the system reset itself.
A sign located on the center line of
the front bridge compartment, which
faces the passengers, also
illuminates when a passenger
requests a next stop.
Speed Sensing Interlock
Front and rear doors will not open if
the vehicle is moving in excess of
2 m.p.h.
Malfunction in Opening
and Closing Front Door
In the event of an entrance door
malfunction, or during an
emergency, the front door(s) can be
manually opened for emergency
exit.
This is accomplished by opening an
exhaust valve located in the
operator’s area by the operator’s left
knee.
NOTE
Apply brakes to authorize and
disengage rear doors and rear
interlocks
NOTE
There is one push button stop
request device, located at the
rear door forward vertical
stanchion.
CAUTION !
Place the door control button to
the front door open position
before closing the exhaust valve.
This will prevent the front doors
from slamming shut.