Daimler SEATTLE 1343B, Руководство оператора

Страница: 51 / 90

Driver’s Pre-Service Inspection
Page 45
DRIVER’S PRE-SERVICE INSPECTION
In order to maintain safe operation,
perform the following inspections
daily.
Make any necessary repairs or
adjustments before the vehicle is
put into service.
Report any problems to
service/maintenance personnel.
Driver Walk Around Test
1. With Master Switch in any
position, set the Park Brake
(not in sleep mode).
2. Press both foot turn signal
switches at the same time.
3. For 2 minutes the Clearance,
Backup, License/Tail and
Interior Kneeling/Ramp will
remain ON.
4. For 2 minutes the Stop, Signal
and Kneeling lights will flash
and the Backup and
Kneeling/Ramp beepers will
sound.
5. Headlights will be ON and must
be changed with the foot
dimmer switch to test both HI
and LOW beams.
Exterior Inspection
1. Clean all windows, mirrors, and
lights.
2. Check and inspect tires for
correct air pressure, wear, and
damage.
3. Inspect the vehicle body for
loose or damaged panels.
4. Inspect all vehicle hoses, air
lines etc., for leaks.
5. Ensure all service access doors
are properly secured.
6. Check all exterior lights for
proper operation.
Interior Inspection
1. Rotate Master Switch to the
RUN position.
2. Start the engine. Look and
listen for abnormal operation.
Report findings to maintenance
personnel.
3. Check all gauges are
functioning.
4. Adjust driver's seat and
steering column to suit
individual needs.
5. Check and adjust mirrors.
6. With the parking brake applied,
check that passenger entrance
and exits doors, egress
windows, and roof hatches are
closed and properly secured.
7. Inspect interior for debris.
8. Check interior and stepwell
lights.