Daimler Freightliner Cascadia 2021, Руководство пользователя

Страница: 220 / 322

regen. See Regen Operations , below, for instructions
on initiating a parked regen.
Regen Operations
Parked regen is initiated by selecting OK when the
driver display screen shows "Parked Regen Re-
quired." See
Fig. 14.2 . If the vehicle is equipped with
the optional digital STOP REGEN switch, parked
regen can be stopped by selecting OK while the
regen is in progress. See
Fig. 14.2 .
Some vehicles may be equipped with a regen inhibit
switch. See
Fig. 14.3 . To stop a regen in progress or
prevent the start of a regen, press the lower half of
the switch. Regen is then delayed until the switch is
no longer active.
NOTE: Parked regen can be initiated only when
the DPF lamp is illuminated.
WARNING
During parked regen, exhaust temperatures are
very high and could cause a fire, heat damage to
objects or materials, or personal injury to per-
sons near the exhaust outlet.
Before initiating a parked regeneration, make cer-
tain the exhaust outlets are directed away from
structures, vegetation, flammable materials, and
anything else that may be harmed by prolonged
exposure to high heat.
To initiate a parked regen, perform the following
steps.
1. Park the vehicle away from all flammable materi-
als, put the transmission in neutral, and set the
parking brake.
f611396 06/10/2016
A B
A. Start Regen Message Screen B. Stop Regen Message Screen
Fig. 14.2, Parked Regen Message Screens
f611395 04/18/2016
REGEN
OFF
Fig. 14.3, Regen Inhibit Switch
Emissions and Fuel Efficiency
14.3