Daimler Freightliner Business class M2 Series, Руководство по обслуживанию

Страница: 14 / 149

Maintenance Operations for Groups 00 through 88
Maintenance
Operation No.
Title of Maintenance Operation
Maintenance Intervals
IM M1 M2 M3 M4 M5
47-03 LNG Fuel System Inspecting • • • • •
47-04 LNG Vacuum Integrity Testing • • •
47-05 CNG Fuel System Inspecting • • • •
47-06 CNG High-Pressure Fuel Filter Element Replacing • • • • •
47-07 CNG Fuel Cylinder Inspecting • • •
49-01 Exhaust System Inspecting (Noise Emission Control) • • • •
49-02 CAT CGI Bellows and Piping Inspection • • • • •
49-03 CAT CGI Bellows Replacement •
60-01 Mirror Folding Check • •
60-02 Aerodynamic Component Inspection • • • • •
72-01 Door Seals Lubricating • • • • • •
83-01 Air Conditioner Inspecting • • • • • •
83-02 HVAC Air Filter Replacing
**
• • •
88-01 Hood Rear Support Lubrication • • • • •
* Change petroleum-based lubricants at M2 (including M3, M4, and M5). Change synthetic lubricants at M5 only.
†
For Detroit axles, complete this procedure once a year or at the following applicable interval, whichever comes first: every 5000 miles (8000 km) for Schedule
I vehicles; every 25,000 miles (40 000 km) for Schedule II vehicles; or every 100,000 miles (161 000 km) for Schedule III vehicles.
‡
Schedule II and Schedule III vehicles only.
§
If equipped with an oil-coalescing desiccant cartridge, replace the cartridge once a year, regardless of mileage. Otherwise use the M5 maintenance interval.
¶
Complete this procedure every 25,000 miles (40 225 km), 3 months, or 500 operating hours, whichever comes first.
**
Replace the HVAC air filter at the recommended interval or every six months.
Table 4, Maintenance Operations for Groups 00 through 88
General Information
00
Overview of Maintenance Operations: 00–05
Business Class M2 Maintenance Manual, November 2016
00/7
Property of American Airlines