Daikin VRV IV HXHD125A8V1B, Руководство по эксплуатации

Страница: 5 / 24

HXHD125A8V1B
VRV IV system indoor unit
4P404572-1 – 2015.04
Operation manual
4
5. O
PERATION OF THE UNIT
The remote controller offers full control over your installation. It can
control all heating applications which vary in capacity, electrical
supply and installed equipment (options). Operating the HXHD125
unit comes down to operating the remote controller.
5.1. Remote controller buttons and icons
1. ON/OFF BUTTON
The ON/OFF button starts or stops the space heating/cooling.
Pressing the ON/OFF button consecutively too many times may
cause malfunction of the system (maximum 20 times per hour).
2. OPERATION LED
The operation LED is lit during space heating/cooling operation.
The LED blinks if a malfunction occurs. When the LED is OFF,
space heating/cooling is inactive while an other operation mode
can still be active.
3. OPERATION MODE ICONS , ,
These icons indicate the current operation mode(s): space
heating (
), domestic water heating ( ) or quiet mode ( ).
Within limits, different modes can be combined, e.g. space
heating and domestic water heating. The corresponding mode
icons will be displayed simultaneously.
If the domestic hot water tank is not installed, the icon will
never be displayed.
4. EXTERNAL CONTROL ICON
This icon indicates that the outdoor unit is working in a forced
operation. As long as this icon is displayed, the remote controller
cannot be operated.
5. DAY OF THE WEEK INDICATOR
This indicator shows the current day of the week.
When reading or programming the schedule timer, the indicator
shows the set day.
6. CLOCK DISPLAY
The clock display shows the current time.
When reading or programming the schedule timer, the clock
display shows the action time.
7. SCHEDULE TIMER ICON
This icon indicates that the schedule timer is enabled.
8. ACTION ICONS
These icons indicate the programming actions for each day of
the schedule timer.
9. OFF ICON
This icon indicates that the OFF action is selected when
programming the schedule timer.
10. INSPECTION REQUIRED and
These icons indicate that inspection is required on the
installation. Consult your dealer.
11. TEMPERATURE DISPLAY
The display shows the current temperature of the installation
either leaving water set point temperature or actual room
temperature.
When changing the room temperature set point, the set point will
be flashing for 5 seconds and then return to the actual room
temperature.
12. SETTING
When you enter field setting in the field setting mode, this will be
indicated. See
"5.11. Operating the optional remote controller"
on page 17 .
13. NOT AVAILABLE
This icon is displayed whenever a non-installed option is
addressed or a function is not available. A function not available
can mean insufficient permission level or can mean that a slave
remote controller is used (see installation manual).
INFORMATION
It is advised to use the remote controller, which includes
room thermostat function, delivered with the unit.
This will prevent excessive space heating and will stop the
outdoor and indoor unit when the room temperature is
above the thermostat set point. Based on the request from
the user there is an immediate feedback to the compressor
control which optimizes the performance.
Refer to the typical application examples in the indoor
installation manual for more details.
WARNING
■
Never let the remote controller get wet. This may
cause an electric shock or fire.
■
Never press the buttons of the remote controller with a
hard, pointed object. This may damage the remote
controller.
■
Never inspect or service the remote controller
yourself, ask a qualified service person to do this.
■
Do not rinse the indoor unit. This may cause electric
shock or fire.
■
Do not climb, sit or stand on top of the unit.
■
Do not place any objects or equipment on the unit top
plate.
INFORMATION
Remark that pushing the button has no influence
on the domestic water heating. Domestic water
heating is only switched on or off by means of the
button and/or disabling the storage schedule timer.
1 3 5 6 22 8
13
32
23
11
17
19
14
4
7
9
12
10
20
31
24
25
21
18
30
29
28
26
27
2 16 15
Master Slave
Permission
level 2 level 3
Operation ON/OFF
✔ ✔ ✔ ✔
Domestic water heating operation ON/
OFF
✔ ✔ ✔ ✔
Setting the leaving water temperature
✔ ✔ ✔
—
Setting the room temperature
✔ ✔ ✔ ✔
Quiet mode ON/OFF
✔ ✔
— —
Weather dependent set point operation
ON/OFF
✔ ✔ ✔
—
Setting the clock
✔ ✔
— —
Programming the schedule timer
✔
— — —
Schedule timer operation ON/OFF
✔
—
✔ ✔
Field settings
✔
— — —
Error code display
✔ ✔ ✔ ✔
Test operation
✔ ✔
— —
✔
= operable