Daikin VRV EMERION RXYQ-AATJA, Руководство по обслуживанию

Страница: 170 / 429

Field Settings for Indoor Unit SiUS342303E
163 Part 5 Field Settings and Test Operation
Note(s)

: Factory setting
When the 10 (20)-6 setting is changed to 02 , several indoor units are controlled by one remote
controller thermistor, so note that the room temperature might be uneven.
1.4.3 Filter Cleaning Sign
Whether or not to display "Filter Cleaning" after operation of certain duration can be selected.

: Factory setting

Filter cleaning sign is not displayed when an Auto-clean Panel is connected.
1.4.4 Information for intelligent Touch Manager/intelligent Touch Controller

: Factory setting

When field setting 10 (20)-6- 02 is set at the same time as 10 (20)-2- 01,02,03, field setting 10
(20)-2 has priority.
When field setting 10 (20)-6-
01 is set at the same time as 10 (20)-2- 01,02,03, field setting 10 (20)-6
has priority for group connection, and 10 (20)-2 has priority for individual connection.
1.4.5 Time for Absence Area Detection (For units with an infrared presence
sensor only)
By selecting the energy-saving operation mode in the absence, the target temperature is shifted to
the energy-saving end by 1°C (1.8°F) (maximum 2°C (3.6°F)) after the state of absence continues
for a certain period of time. Absent time defined for detection can be selected as follows:

: Factory setting
Mode
No.
First Code
No.
Second Code
No.
Contents
10 (20) 6
01

Remote controller thermistor control is not permitted during
group control

02
Remote controller thermistor control is permitted during group
control.
Mode
No.
First Code No. Second Code
No.
Contents
10 (20) 3
01

Displayed

02 Not displayed
Mode
No.
First Code No. Second Code
No.
Contents
10 (20) 5
01

Only indoor unit sensor value (or remote controller sensor
value, if installed.)

02 Sensor values according to 10 (20)-2 and 10 (20)-6.
Mode
No.
First Code No. Second Code
No.
Contents
10 (20) 7
01

30 minutes

02 60 minutes