manualshive.com logo in svg

Daikin SkyAir RZR-TA Series, Руководство по обслуживанию, Страница: 188 / 331

Поделиться
Скачать
Daikin SkyAir RZR-TA Series Скачать руководство пользователя страница 188

Field Settings from Outdoor Unit

SiUS281811EA

182

Part 5 Field Settings and Test Operation

2.7  Setting of Refrigerant Recovery Mode

When carrying out the refrigerant collection on site, fully open the respective electronic expansion 
valve of indoor and outdoor units
All indoor and outdoor unit’s operation are prohibited.

Operation procedure

2.8  Setting of Vacuuming Mode

In order to perform vacuuming operation on site, fully open the electronic expansion valves of 
indoor and outdoor units and turn on some solenoid valves.

Operating procedure

(1) In setting mode 2 with units in stop mode, set the item No.21 (refrigerant recovery / 

vacuuming mode) to ON. The respective expansion valve of indoor and outdoor units are 
fully opened. 

Test Operation

 and 

Under Centralized Control

 are displayed on the 

remote controller, and the indoor / outdoor unit operation is prohibited. After setting, do 
not cancel setting mode 2 until completion of refrigerant recovery operation.

(2) Collect the refrigerant using a refrigerant recovery unit. (See the instruction attached to 

the refrigerant recovery unit for more detail.)

(3) Press the 

MODE (BS1)

 button once and return to setting mode 2. 

(1) In setting mode 2 with units in stop mode, set the item No.21 (refrigerant recovery / 

vacuuming mode) to ON. The respective expansion valve of indoor and outdoor units are 
fully opened. 

Test Operation

 and 

Under Centralized Control

 are displayed on the 

remote controller, and the indoor / outdoor unit operation is prohibited.
After setting, do not cancel setting mode 2 until completion of Vacuuming operation.

(2) Use the vacuum pump to perform vacuuming operation. 
(3) Press the 

MODE (BS1)

 button once and reset setting mode 2.

Содержание SkyAir RZR-TA Series












































































































































































































































































































































Отзывы:

Нет отзывов