Daikin Siesta ATXM25N2V1B, Руководство по установке для специалистов

Страница: 7 / 24

3 About the box
Installer reference guide
7
ATXM20~50+FTXM20~71N2V1B
Daikin room air conditioner
4P518023-4C – 2018.09
▪ Installer reference guide:
▪ Preparation of the installation, good practices, reference data,…
▪ Format: Digital files on http://www.daikineurope.com/support-
and-manuals/product-information/
Latest revisions of the supplied documentation may be available on
the regional Daikin website or via your dealer.
The original documentation is written in English. All other languages
are translations.
Technical engineering data
▪ A subset of the latest technical data is available on the regional
Daikin website (publicly accessible).
▪ The full set of latest technical data is available on the Daikin
extranet (authentication required).
2.2 Installer reference guide at a
glance
Chapter Description
General safety
precautions Safety instructions that you MUST read
before installing
About the documentation What documentation exists for the
installer
About the box How to unpack the units and remove
their accessories
About the unit ▪ System layout
▪ Operation range
Preparation What to do and know before going
on‑site
Installation What to do and know to install the
system
Configuration What to do and know to configure the
system after it is installed
Commissioning What to do and know to commission the
system after it is configured
Hand‑over to the user What to give and explain to the user
Disposal How to dispose of the system
Technical data Specifications of the system
Glossary Definition of terms
3 About the box
3.1 Overview: About the box
This chapter describes what you have to do after the box with the
indoor unit is delivered on-site.
It contains information about:
▪ Unpacking and handling the unit
▪ Removing the accessories from the unit
Keep the following in mind:
▪ At delivery, the unit MUST be checked for damage. Any damage
MUST be reported immediately to the carrier's claims agent.
▪ Bring the packed unit as close as possible to its final installation
position to prevent damage during transport.
▪ When handling the unit, take into account the following:
Fragile, handle the unit with care.
Keep the unit upright in order to avoid damage.
▪ Prepare the path along which you want to bring the unit inside in
advance.
3.2 Indoor unit
3.2.1 To unpack the indoor unit
3.2.2 To remove the accessories from the
indoor unit
1
3
2
2
1 Remove the accessories located at the bottom of the package.
1× 1× 2× 2× 2× 1× 1× 1× 1× 1× 1×
f e1 d e2 b a c g h i j
a Installation manual
b Operation manual
c General safety precautions
d Wireless LAN adapter (may NOT be available in some
countries)
e1 Class 15~42 : Titanium apatite deodorizing filter (without
frame)
e2 Class 50~71: Titanium apatite deodorizing filters (with
frame)
f Indoor unit fixing screw (M4×12L). Refer to "6.6.3 To fix the
unit on the mounting plate" on page 17 .
g Dry battery AAA.LR03 (alkaline) for user interface
h User interface holder
i User interface
j Mounting plate