Procedure to Remove Outside Panels
Si281317
2
Removal Procedure
1. Procedure to Remove Outside Panels
Procedure
Warning
Be sure to wait for 10 minutes or more after turning off all power
supplies before disassembling work.
Step
Procedure
Points
1
For the suction grille,
pull the lower parts (in 7
places) frontward,
disengage the hooks at
the top of the grille with
a slotted screwdriver,
and then press the
overall grille downward
to disassemble it.
2
For the front panel (side
front panel), unscrew a
single mounting screw
and then press this
panel downward to
remove it.
3
For the top panel,
unscrew the 8 mounting
screws and then
remove this panel.
4
For the front panel of
the piping cover,
unscrew a single
mounting screw and
then remove this panel.
5
For the side panel of
the piping cover,
unscrew the 4 mounting
screws and then
remove this panel.
6
For the side rear panel,
unscrew the 6 mounting
screws and then
remove this panel.
Hooks
Suction grille
Top panel
Front panel of
piping cover
Front
panel
Side panel of piping
cover
Side
rear
panel
