manualshive.com logo in svg

Daikin RXP50N5V1B, Руководство по установке для специалистов

Поделиться
Скачать
Daikin RXP50N5V1B Скачать руководство пользователя страница 69

17

 | 

Glossary

Installer reference guide

69

RXF50~71D5V1B
R32 split series
4P519439-18T – 2022.06

17 Glossary

Dealer

Sales distributor for the product.

Authorised installer

Technical skilled person who is qualified to install the product.

User

Person who is owner of the product and/or operates the product.

Applicable legislation

All international, European, national and local directives, laws, regulations
and/or codes that are relevant and applicable for a certain product or
domain.

Service company

Qualified company which can perform or coordinate the required service to
the product.

Installation manual

Instruction manual specified for a certain product or application, explaining
how to install, configure and maintain it.

Operation manual

Instruction manual specified for a certain product or application, explaining
how to operate it.

Maintenance instructions

Instruction manual specified for a certain product or application, which
explains (if relevant) how to install, configure, operate and/or maintain the
product or application.

Accessories

Labels, manuals, information sheets and equipment that are delivered with
the product and that need to be installed according to the instructions in
the accompanying documentation.

Optional equipment

Equipment made or approved by Daikin that can be combined with the
product according to the instructions in the accompanying documentation.

Field supply

Equipment NOT made by Daikin that can be combined with the product
according to the instructions in the accompanying documentation.

Содержание RXP50N5V1B









































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды