Daikin RoCon BF Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 64

Daikin RoCon BF Скачать руководство пользователя страница 5

1

x

General safety precautions

Daikin RoCon
Daikin Control unit
008.1543999_00 – 03/2017 – EN

Operating instructions

5

1.1.1 Observing the instructions

●

The original documentation is written in
German. All other languages are translations.

●

Please read this manual and applicable
documents carefully and thoroughly before
proceeding with the installation or modifi-
cation of the heating system.

●

The precautionary measures described in this
document cover very important topics. Follow
them meticulously.

All the activities required for operation and ad-
justment are described in this manual. All
heating parameter needed for smooth operation
are already factory-set.

●

Make a note of the preset values before you
make any changes to the unit configuration.

Relevant documents

– Daikin heat generator:

– the associated installation and mainte-

nance instructions for the specialised com-
pany

– the operating instructions for the operator

and

– the operating manual for the operator.

– For connecting to a Daikin solar system:



the associated installation and operating
instructions.

– For connecting to another Daikin heat gener-

ator or optional accessories:



the associated installation and operating
instructions.

The guides are included in the scope of supply
for the individual units.

1.1.2 Meaning of warnings and symbols

Warnings in this manual are classified according
into their severity and probability of occurrence.

Special warning signs

Some types of danger are represented by
special symbols:

Validity

Some information in this manual has limited va-
lidity. The validity is highlighted by a symbol.

DANGER!

Draws attention to imminent danger.
Disregarding this warning can lead to serious
injury or death.

WARNING!

Indicates a potentially dangerous situation.
Disregarding this warning may result in serious
physical injury or death.

CAUTION!

Indicates a situation which may cause possible
damage.
Disregarding this warning can cause damage to
property and the environment, and result in
minor injuries.

This symbol identifies user tips and par-
ticularly useful information, but not warn-
ings or hazards.

Electric current

Risk of burns

Only valid for oil fired heating unit A1

Only valid for GCU compact

Only valid/available for connected control

Only valid/available for connected mixer
module

«
...
3
4
5
6
7
...
»

Содержание RoCon BF

































































Отзывы:

Нет отзывов