background image

1 About the documentation

Installation and operation manual

5

REYQ8~20+REMQ5U7Y1B
VRV IV+ heat recovery
4P546222-1B – 2020.10

15 Electrical installation

31

15.1

About electrical compliance.......................................................

31

15.2

Safety device requirements .......................................................

32

15.3

Field wiring: Overview ...............................................................

32

15.4

To route and fix the transmission wiring ....................................

33

15.5

To connect the transmission wiring ...........................................

33

15.6

To finish the transmission wiring ...............................................

34

15.7

To route and fix the power supply .............................................

34

15.8

To connect the power supply ....................................................

34

15.9

To check the insulation resistance of the compressor ..............

34

16 Configuration

35

16.1

Making field settings ..................................................................

35

16.1.1

About making field settings ......................................... 35

16.1.2

Field setting components ............................................ 35

16.1.3

To access the field setting components...................... 35

16.1.4

To access mode 1 or 2 ............................................... 36

16.1.5

To use mode 1 ............................................................ 36

16.1.6

To use mode 2 ............................................................ 36

16.1.7

Mode 1: Monitoring settings........................................ 36

16.1.8

Mode 2: Field settings................................................. 37

16.1.9

To connect the PC configurator to the outdoor unit .... 38

16.2

Using the leak detection function ..............................................

38

16.2.1

About automatic leak detection................................... 38

17 Commissioning

38

17.1

Precautions when commissioning .............................................

39

17.2

Checklist before commissioning ................................................

39

17.3

About the test run ......................................................................

39

17.4

To perform a test run .................................................................

40

17.5

Correcting after abnormal completion of the test run ................

40

18 Hand-over to the user

40

19 Troubleshooting

40

19.1

Solving problems based on error codes....................................

40

19.2

Error codes: Overview ...............................................................

40

20 Technical data

44

20.1

Service space: Outdoor unit ......................................................

44

20.2

Piping diagram: Outdoor unit.....................................................

46

20.3

Wiring diagram: Outdoor unit ....................................................

48

21 Disposal

50

1

About the documentation

1.1

About this document

Target audience

INFORMATION

This appliance is intended to be used by expert or trained
users  in  shops,  in  light  industry  and  on  farms,  or  for
commercial use by lay persons.

Documentation set

This  document  is  part  of  a  documentation  set.  The  complete  set
consists of:

General safety precautions:

▪ Safety instructions that you must read before installing

▪ Format: Paper (in the box of the outdoor unit)

Outdoor unit installation and operation manual:

▪ Installation and operation instructions

▪ Format: Paper (in the box of the outdoor unit)

Installer and user reference guide:

▪ Preparation of the installation, reference data,…

▪ Detailed  step-by-step  instructions  and  background  information

for basic and advanced usage

▪ Format:  Digital  files  on 

http://www.daikineurope.com/support-

and-manuals/product-information/

Latest revisions of the supplied documentation may be available on
the regional Daikin website or via your dealer.

The original documentation is written in English. All other languages
are translations.

Technical engineering data

▪ A 

subset

  of  the  latest  technical  data  is  available  on  the  regional

Daikin website (publicly accessible).

▪ The 

full  set

  of  latest  technical  data  is  available  on  the  Daikin

Business Portal (authentication required).

2

Specific installer safety
instructions

Always observe the following safety instructions and regulations.

WARNING

Tear apart and throw away plastic packaging bags so that
nobody,  especially  children,  can  play  with  them.  Possible
risk: suffocation.

CAUTION

Appliance not accessible to the general public, install it in a
secured area, protected from easy access.

This  unit,  both  indoor  and  outdoor,  is  suitable  for
installation 

in 

commercial 

and 

light 

industrial

environment.

CAUTION

Excessive refrigerant concentrations in a closed room can
lead to oxygen deficiency.

DANGER: RISK OF ELECTROCUTION

Do NOT leave the unit unattended when the service cover
is removed.

DANGER: RISK OF BURNING/SCALDING

DANGER: RISK OF ELECTROCUTION

WARNING

Take sufficient precautions in case of refrigerant leakage. If
refrigerant  gas  leaks,  ventilate  the  area  immediately.
Possible risks:

▪ Excessive  refrigerant  concentrations  in  a  closed  room

can lead to oxygen deficiency.

▪ Toxic  gas  might  be  produced  if  refrigerant  gas  comes

into contact with fire.

WARNING

ALWAYS  recover  the  refrigerant.  Do  NOT  release  them
directly  into  the  environment.  Use  a  vacuum  pump  to
evacuate the installation.

Содержание REYQ8U7Y1B





















































Отзывы: