Daikin Rebel Applied DPSA Скачать руководство пользователя страница 73

Страница: 73 / 162

Unit Operation

www.DaikinApplied.com 73

IM 1287-4 • REBEL APPLIED ROOFTOP

Menu.

NOTE:

Alarms can be acknowledged without entering a

password.

The password field initially has a value **** where each *

represents an adjustable field. These values can be changed

by entering the Edit Mode.

Entering an invalid password has the same effect as continuing

without entering a password.
Once a valid password has been entered, the controller

allows further changes and access without requiring the user

to enter a password until either the password timer expires

or a different password is entered. The default value for this

password timer is 10 minutes. It is changeable from 3 to 30

minutes via the Timer Settings menu in the Extended Menus.

Figure 126: Password Main Page

Figure 127: Password Entry Page

Navigation Mode

In the Navigation Mode, when a line on a page contains no

editable fields all but the value field of that line is highlighted

meaning the text is white with a black box around it. When the

line contains an editable value field the entire line is inverted

when the cursor is pointing to that line.
When the navigation wheel is turned clockwise, the cursor

moves to the next line (down) on the page. When the wheel is

turned counter-clockwise the cursor moves to the previous line

(up) on the page. The faster the wheel is turned the faster the

cursor moves.
When the Back Button is pressed the display reverts back to

the previously displayed page. If the Back button is repeated

pressed the display continues to revert one page back along

the current navigation path until the “main menu” is reached.
When the Menu (Home) Button is pressed the display reverts

to the “main page.”
When the Alarm Button is depressed, the Alarm Lists menu is

displayed.

Edit Mode

The Editing Mode is entered by pressing the navigation wheel

while the cursor is pointing to a line containing an editable field.

Once in the edit mode pressing the wheel again causes the

editable field to be highlighted. Turning the wheel clockwise

while the editable field is highlighted causes the value to be

increased. Turning the wheel counter-clockwise while the

editable field is highlighted causes the value to be decreased.

The faster the wheel is turned the faster the value is increased

or decreased. Pressing the wheel again cause the new value

to be saved and the keypad/display to leave the edit mode and

return to the navigation mode.

Daikin AHU

1/3

Enter Password
Continue W/O Password
Version Information

Enter Password 1/1

Enter Password

***

Содержание Rebel Applied DPSA



































































































































































Результаты поиска

Содержание Rebel Applied DPSA

Отзывы:

Daikin Rebel Applied DPSA, Руководство по установке и запуску, Страница: 73 / 162

Результаты поиска

Содержание Rebel Applied DPSA

Отзывы: