Daikin Quaternity H-Series, Инженерные данные

Страница: 74 / 80

EDUS04-906_b Optional Accessories
Room Air Conditioners H-Series 73
Installation
This prod u ct is a v aila b le in t w o types. The KRP413A1S · KRP413AA1S is for installation in a case independent of the indoor u nit, and
the KRP413A1 is for installation w ithin the indoor u nit.
1. KRP413A1S · KRP413AA1S
1 Installation dia g ram
Indoor u nit PCB
Adaptor case
w iring
Local w iring or
po w er cord, etc.
S21
2 Components
Adaptor case assy W iring (approx. 0. 8 m)
(Adaptor (PCB) is attached in the adaptor case.)
Accessories
• Binding
b and (4 pcs.)
• Sec u ring tape for attaching to the indoor u nit (2 sets)
• Scre w s for attaching the adaptor case (4 pcs.)
• Scre w s for attaching to the w all (3 pcs.)
Installation man u al
2. KRP413A1
For this type, install the adaptor PCB w ithin the indoor u nit. The method of
installation and connection v ary depending on the model of the air
conditioner. See yo u r air conditioner installation man u al for details.
1 Components
Adaptor PCB W iring (approx. 0.25 m)
Installation man u al
3. Attachin g Adaptor Case Assy (for KRP413A1S · KRP413AA1S)
1 Usin g the screws (to mount on a wall, etc.)
Use the 3 s u pplied scre w s to attach the case assy .
Indoor u nit
Adaptor case
Install the adaptor case assy as close to the indoor u nit as possi b le.
Remo v ing case front
Adaptor PCB
Case front
Scre w
Scre w co v er
Remo v e the scre w co v er, one of the scre w s
and then the case front.
Attach the case b ack to the s u rface b y
tightening the scre w s thro u gh the scre w
holes (one ro u nd hole, t w o long holes).
After connecting the ca b les (refer to the follo w ing sections), replace the
case front. Be caref u l not to damage the w iring in the case.
W iring
Press in so that the prong catches
the case
b ack.
Scre w
Scre w co v er
2 Usin g securin g tape (to attach on the indoor unit)
Attach the adaptor case w ith the s u pplied sec u ring tape.
Remo v e the case front (as for mo u nting on a w all).
After connecting the ca b les (see the follo w ing sections), replace the
case front. It can b e scre w ed to the case b ack from the rear w ith the
fo u r s u pplied scre w s.
Be caref u l not to damage the w iring in the case.
Attach the hook side (loop side) of the incl u ded sec u ring tape to the rear
s u rface of the HA case, then attach the loop side (hook side) to the top of
the air conditioner u nit spaced at the same inter v als.
Sec u ring tape
Hook side (loop side)
Sec u ring tape
Loop side (hook side)
Indoor u nit
To pre v ent the adaptor case assy from falling, do not u se the sec u ring
tape for attaching it to a w all or other s u rface.