6
|
Operation
User reference guide
23
FTXM20~4 FTXM20~71R2V1B
Daikin room air conditioner
4P518786-5F – 2020.06
2
Press
to
start
operation.
Result:
and the selected mode are displayed on the LCD.
3
Press
or
one or more times to lower or raise the
temperature
.
Cooling operation Heating operation Automatic
operation
Drying or Fan only
operation
18~32°C
10~30°C
18~30°C
—
Note:
When using
drying
or
fan
only
mode, you cannot adjust the temperature.
4
Press
to
stop
operation.
Result:
disappears from the LCD. The operation lamp goes off.
6.4 Airflow rate
1
Press to choose:
5 airflow rate levels, from " " to " "
Automatic airflow rate operation
Indoor unit quiet operation. When the airflow rate is set to " ",
the noise from the unit will be reduced.
INFORMATION
▪
If the unit reaches the temperature setpoint in cooling or heating mode, the fan
will stop operating.
▪
When using drying operation mode, you CANNOT adjust the airflow rate setting.
6.4.1 To adjust the airflow rate
1
Press to change the airflow setting as follows:
6.5 Airflow direction
When.
Adjust the airflow direction as desired.
What.
The system directs the airflow differently, depending on the user selection
(swinging or fixed position). It does so by moving horizontal blades (flaps) or
vertical blades (louvers).
Setting
Airflow direction
Vertical automatic swing
Moves up and down.
Horizontal automatic
swing
Moves from side to side.
+
3-D airflow direction
Moves alternately up and down and from side
to side