Daikin Modular Plate, Инструкция по установке, использованию и техническому обслуживанию

Страница: 20 / 64

20
Parts and accessories
Dampers
The dampers of the Modular range are all made of aluminium with gasket,
with class II seal according to EN 1751. The external and exhaust air damp-
ers can be equipped with a rainproof system or an anti-pest net.
Internal structure
The internal sheets used for attaching components like fans, filters and re-
cuperators are entirely made of Aluzinc, guaranteeing high resistance to
corrosion. All points of contact with the internal section are equipped with
gaskets to ensure a superior seal against air leakage. The condensate col-
lection tanks in the counter flow recuperators (Modular P) are made entirely of stainless steel, thus ensur-
ing maximum durability. The welds of the exhaust pipe and of the edges are made of continuous wire in
an inert gas atmosphere.
Heat exchange coils (Only in the coil module)
The heat exchange coils are of the finned pack type. This component is made of copper tubes, aluminium
frame and BLUE FIN aluminium fins. Depending on the choices, the coils can use water or direct expan-
sion. In both cases, the battery is controlled. In the case of DX units are supplied with “ERQ Daikin" control
board and "Daikin" electronic expansion valve mounted and connected. In the case of water batteries,
the control is entrusted to a three/two-way valve complete with modulating actuator supplied separately.
Condensate collection basins
The condensate collection tanks in the counter flow recuperators (Modular P) are made entirely of stain-
less steel, thus ensuring maximum durability. The welds of the exhaust pipe and of the edges are made of
continuous wire in an atmosphere of inert gas: all the welds are protected with zinc-based paints.
Anti-vibration joints
On request, the units can be equipped with anti-vibration joints for the connection of the external air
ducts to the machine. These components are flanged and made of fire-retardant PVC-coated polyester
fabric.
Covering roof
The machines for outdoor use can be equipped with Aluzinc roofs, resistant to corrosion and therefore
ensuring the extreme durability of the component.
Silencers
With drawstring with 100 mm thick silencing partitions. The silencers are built according to the VDI6022
hygiene standard and the silencing material is rock wool protected by a flake-proof film compliant with
the VDI6022 standard. .