Assembling the Fuse Disconnect
Components
1.
Remove (2) screws securing the base plate to the
box, and disconnect the base from the cover.
2.
Locate receptacle and plastic bag containing screws
and wire grommet. Assemble the receptacle and
grommet for a right hand or left hand unit installation
(Figure 2).
Figure 2. Location of Disconnect Assembly
3.
Knock out top holes for fuse holders. Locate fuses
and fuse holders from kit.
4.
Remove fuse holder top, insert fuse, and reassemble
top to fuse holder. Install fuse holders into box using
(4) screws.
Installation & Maintenance Data
Console Water Source Heat Pumps – Model MHC & MHW
Fuse/ Non-Fuse Disconnect (High-Sill Units Only)
Group:
WSHP
Part Number:
669286601
Date:
October 2013
IM 975
Procedure – Field Installed Accessory
1.
Remove the fuse disconnect components from the
shipping carton and check that all parts are included
in the kit. Compare the parts to the parts list enclosed
with the kit.
Figure 1. Fused Disconnect Assembly
WARNING
Installation and maintenance are to be performed by
qualified personnel who are familiar with local codes and
regulations, and experienced with this type of equipment.
Disconnect all electrical power before servicing unit.
Electrical shock will cause severe injury or death.
DANGER
CAUTION
Sharp edges can cause personal injury. Avoid contact
with them.
©2013 Daikin Applied • www.DaikinAP.com • 800.432.1342
