Daikin MCS341-DS1-111, Руководство по установке для специалистов

Страница: 10 / 44

2 | Installation
Installer reference guide
10
MCS341-DS1-111
Security gateway
4P529063-1A – 2020.12
230 V AC
24 V DC
a
c d b
1 Connect the power supply to the 3 terminals, L (live), N (neutral) and ground
in the input section of the power supply (PS).
Using the wiring delivered with the Security gateway:
2 Connect the DC power supply output terminals of the PS to the contact input
terminals of the Security gateway module. Take the polarity of the wires into
account.
3 Connect the earth terminal of the PS (a) to the earth terminal of the Security
gateway (b).
Once all wiring has been completed:
4 Double-check and then turn on the power supply.
CAUTION
The power supply is ONLY guaranteed when the "DC_OK" LED (DC_OK)(c) on the PS
and the "PWR" LED (PWR) (d) on the Security gateway module are green.
If one or more of the above LEDs are NOT lighting up, check for faulty wiring.
2.6.2 To connect the Security gateway to the local network
Basic setup (recommended)
1 Connect the power supply in the same way as shown in "To connect the
power supply" [
4
9].
2 Add the Security gateway to the local network as shown in the following
figure: