Daikin MAGNITUDE WME-D Скачать руководство пользователя страница 53

53 

IOM 1372

WWW.DAIKINAPPLIED.COM

APPENDIx

Appendix

Limited Product Warranty

 

Form No. 933-430285Y-01-A (11/2023)    

Part No.  043028500 Rev.0F 

 

DAIKIN APPLIED AMERICAS INC. 

LIMITED PRODUCT WARRANTY 

(

United States and Canada

 

WARRANTY 

Daikin Applied Americas Inc.  dba Daikin Applied (“Company”) warrants to contractor, purchaser and any owner of the product 

(collectively “Owner”) that, subject to the exclusions set forth below Company, at its option, will repair or replace defective parts in 

the event any product manufactured by Company, including products sold under the brand name Daikin and used in the United States 

or Canada, proves defective in material or workmanship within twelve (12) months from initial startup or eighteen (18) months from 

the date shipped by Company, whichever occurs first. Authorized replacement parts are warranted for the remainder of the original 

warranty. All shipments of such parts will be made FOB factory, freight prepaid and allowed. Company reserves the right to select 

carrier and method of shipment. In addition, Company provides labor to repair or replace warranty parts during Company normal 

working hours on products with rotary screw compressors or centrifugal compressors. Warranty labor is not provided for any other 

products. 

Company must receive the Registration and Startup Forms for products containing motor compressors and/or furnaces within ten (10) 

days of original product startup, or the ship date and the startup date will be deemed the same for determining the commencement 

of the warranty period and this warranty shall expire twelve (12) months from that date. For additional consideration, Company will 

provide an extended warranty(ies) on certain products or components thereof. The terms of the extended warranty(ies) are shown on 

a separate extended warranty statement. 

No person (including any agent, sales representative, dealer or distributor) has the authority to expand the Company’s obligation 

beyond the terms of this express warranty or to state that the performance of the product is other than that published by Company. 

 

EXCLUSIONS 

1.

 

If free warranty labor is available as set forth above, such free labor does not include diagnostic visits, inspections, travel time and 

related expenses, or unusual access time or costs required by product location. 

2.

 

Refrigerants, fluids, oils and expendable items such as filters are not covered by this warranty. 

3.

 

This warranty shall not apply to products or parts : (a) that have been opened, disassembled, repaired, or altered, in each case by 

anyone other than Company or its authorized service representative; (b) that have been subjected to misuse, abuse, negligence, 

accidents, damage, or  abnormal use or service; (c)  that have not been properly maintained; (d)  that  have been operated  or 

installed, or have had startup performed, in each case in a manner contrary to Company's printed instructions; (e) that have been 

exposed, directly or indirectly, to a corrosive atmosphere or material such as, but not limited to, chlorine, fluorine, fertilizers, 

waste water, urine, rust, salt, sulfur, ozone, or other chemicals, contaminants, minerals, or corrosive agents;  (f) that were 

manufactured or furnished by others and/or are not an integral part of a product manufactured by Company; or (g) for which 

Company has not been paid in full. 

4.

 

This warranty shall not apply to products with rotary screw compressors or centrifugal compressors if such products have not 

been started, or if such startup has not been performed, by a Daikin Applied or Company authorized service representative.  

 

SOLE REMEDY AND LIMITATION OF LIABILITY 

THIS WARRANTY CONSTITUTES THE SOLE WARRANTY MADE BY COMPANY. COMPANY'S LIABILITY TO OWNER AND OWNER’S 

SOLE REMEDY UNDER THIS WARRANTY SHALL NOT EXCEED THE LESSER OF: (i) THE COST OF REPAIRING OR REPLACING 

DEFECTIVE PRODUCTS; AND (ii) THE ORIGINAL PURCHASE PRICE ACTUALLY PAID FOR THE PRODUCTS.  COMPANY MAKES NO 

REPRESENTATION OR WARRANTY, EXPRESS OR IMPLIED, REGARDING PREVENTION OF MOLD/MOULD, FUNGUS, BACTERIA, 

MICROBIAL GROWTH, OR ANY OTHER CONTAMINATES. THIS WARRANTY  IS GIVEN IN  LIEU OF ALL OTHER WARRANTIES, 

INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, 

AND NON-INFRINGEMENT, WHICH ARE HEREBY DISCLAIMED. IN NO EVENT AND UNDER NO CIRCUMSTANCE SHALL COMPANY 

BE LIABLE TO OWNER OR ANY THIRD PARTY FOR INCIDENTAL, INDIRECT, SPECIAL, CONTINGENT, CONSEQUENTIAL,

 

DELAY OR 

LIQUIDATED DAMAGES FOR ANY REASON, ARISING FROM ANY CAUSE WHATSOEVER, WHETHER THE THEORY FOR RECOVERY IS 

BASED IN LAW OR IN EQUITY, OR IS UNDER A THEORY OF BREACH CONTRACT OR WARRANTY, NEGLIGENCE, STRICT LIABILITY, 

OR OTHERWISE. THE TERM “CONSEQUENTIAL DAMAGE” INCLUDES, WITHOUT LIMITATION, THOSE DAMAGES ARISING FROM 

BUSINESS INTERRUPTION  OR  ECONOMIC  LOSS, SUCH AS LOSS  OF ANTICIPATED PROFITS, REVENUE, PRODUCTION, USE, 

REPUTATION, DATA OR CROPS.  

 

ASSISTANCE 

To obtain assistance or information regarding this warranty, please contact your local sales representative or a Daikin Applied office. 

Содержание MAGNITUDE WME-D

























































Отзывы: