Daikin homecontrols EKRRVATU1BA, Инструкция по установке и эксплуатации

Страница: 12 / 36

12
Function and accessory overview Start-up
5 Start-up
5.1 Connecting further DHC accessories
Read this entire section before starting
connecting other devices.
First set up your DHC Access Point via the
ONECTA app to enable operation of other DHC
accessories within your system. For further infor-
mation, see the manual of the DHC Access Point.
To integrate the DHC Radiator Thermostat into your eco-
system and to enable control via the ONECTA app, you
must connect it to your DHC Access Point first. To do this,
proceed as follows:
1. Open the ONECTA app.
2. Click on the plus symbol.
3. Select the menu item Add Daikin Home Con-
trols .
4. Select Add DHC Accessory .
5. Open the battery compartment (B) by pulling the
cover backwards and then down (
see figure 7
).
6. Remove the insulation strip from the battery com-
partment.
7. Connection mode remains activated for 3 minutes.
Accessory overview ( see figure 1 ):
(A) Control wheel/boost button
(B) Battery compartment cover
(C) System button and LED
(D) Display
(E) Union nut
Display overview (
see figure 2
):
(F) Valve information
(G) Setpoint temperature
(H)
Manual operation
(I)
Boost mode
(J) Operating lock
(K) Open window symbol
(L) Radio transmission
(M) Battery symbol