Daikin Home Controls EKRRVATR2BA, Руководство пользователя

Страница: 22 / 40

22
Configuration Configuration
time, no other operation is possible.
» After the adapting run has been successful, the
display returns back to normal.
If the adapter run has been initiated prior to mount-
ing or if an error message (F1, F2, F3) is displayed,
press the menu/boost button (G) and the motor re-
verses to the InS position.
6 Configuration
The configuration of the accessory can be set up complete -
ly in the ONECTA app. For further information on configura -
tion of the accessory without using the DHC Access Point,
see the DHC Application Guide.
The following modes and settings can be adjusted:
6.1
Prg
Offset
AUTO
MANU
BOOST
Mo Tu We Th Fr Sa Su
0 6 12 18 24
Automatic mode
6.2
Prg
Offset
AUTO
MANU
BOOST
Mo Tu We Th Fr Sa Su
0 6 12 18 24
Manual mode
6.3
Prg
Offset
AUTO
MANU
BOOST
Mo Tu We Th Fr Sa Su
0 6 12 18 24
Offset temperature (not yet available)
6.4
Prg
Offset
AUTO
MANU
BOOST
Mo Tu We Th Fr Sa Su
0 6 12 18 24
Programming a schedule
6.5
Prg
Offset
AUTO
MANU
BOOST
Mo Tu We Th Fr Sa Su
0 6 12 18 24
Operating lock (not yet available)
6.6
Prg
Offset
AUTO
MANU
BOOST
Mo Tu We Th Fr Sa Su
0 6 12 18 24
Holiday mode
6.1 Automatic mode
In automatic mode, the temperature is controlled in ac-
cordance with the set heating schedule. Manual changes
are activated until the next point at which the schedule
changes. Afterwards, the defined schedule will be activated
again.
6.2 Manual mode
In manual mode, the temperature is controlled in accor-
dance with the current temperature set via the push-but-
tons (E + F) . The temperature remains activated until the
next manual change.
6.3 Offset temperature (not yet available)
As the temperature is measured on the DHC Radiator
Thermostat, the temperature distribution can vary through-
out a room. To adjust this, a temperature offset of ±3.5 °C
can be set. If a nominal temperature of e.g. 20 °C is set
but the room presents with only 18 °C, an offset of -2.0 °C
needs to be set.
This setting is not yet available in the ONECTA app
and cannot be changed for the moment.