Daikin Home Controls EKRRVATR2BA, Руководство пользователя

Страница: 16 / 40

16
Start-up Start-up
5 Start-up
5.1 Connecting DHC accessories
Read this entire section before starting to
connect other accessories.
To integrate the DHC Radiator Thermostat into your eco-
system and enable it to communicate with other accesso-
ries, you must connect them first.
You can connect the DHC Radiator Thermostat to the DHC
Access Point via the ONECTA app. It is also possible to
create a direct connection to other DHC accessories. For
further information on direct connection, see the DHC
Application Guide.
5.1.1 Connecting to the DHC Access Point
If you have already connected the DHC Radiator
Thermostat to another DHC accessory, or if you
have changed the default settings, you first have to
restore the factory settings of the DHC Radiator
Thermostat before you can connect it to the DHC
Access Point (see “10 Restore factory settings” on
page 33 ).
First set up your DHC Access Point via the
ONECTA app to enable operation of other DHC ac-
cessories within your ecosystem. For further infor-
mation, see the manual of the DHC Access Point.
To connect the DHC Radiator Thermostat to the DHC
Access Point, proceed as follows:
1. Open the ONECTA app.
2. Click on the plus symbol (+).
3. Select the menu item Add Daikin Home Controls .
4. Select Add DHC Accessory .
5. Open the battery compartment (B) by pulling the
cover down (see figure 3) .
6. Remove the insulation strip from the battery com-
partment.
» Connection mode remains activated for 3 minutes
(see figure 4) .
You can manually start the connection mode for
another 3 minutes by pressing the system button
(D) shortly (see figure 4) .
7. Follow the instructions in the app.